K54
K 54 is a double acting pneumatic piston seal designed to be used in low axial housing grooves.
-
Easy installation
-
Wide range of dimensions
-
Low friction
-
Rounded sealing geometry and flexible centre part give good tightness
-
Low axial housing heights
Short stroke cylinder and valves.
It can be assembled into one piece piston by hand. It is very important that the assembly tools must be of soft material and have no sharp edges. Before installation the wiper must be oiled with system oil.
Small axial housing make K54 to be used in short stroke cylinders. For special applications that require high temperatures, K54 can be produced in FKM material.
Material | Code |
NBR 70 SHORE A | NBR7001 |
Surface roughness | Rmax |
Sliding Surface Ød | ≤4 μm |
Groove Base ØD | ≤10 μm |
Groove Flanks | ≤15 μm |
OPERATING CONTITIONS
Media | Prepared, dried and de-oiled compressed air |
Temperature | -30 °C +105 °C |
Pressure | ≤12 bar |
Speed | ≤1.0 m/sec |
Szeretne többet megtudni a termékről?
E-mail
info@intramark.hu
Phone
+36 52 540 555
+36 20 913 4498
Nyitvatartás
H-CS: 8:00 – 16:30
P: 8:00 – 16:00
Intramark HQ
4031 Debrecen,
Köntösgát sor 10.